hcxdumptool - Small tool to capture packets from wlan devices.

hcxdumptool – Small tool to capture packets from wlan devices.

hcxdumptool is a Small tool to capture packets from wlan devices.
Tools Description:
+ hcxdumptool: Raw socket version of wlandump-ng
+ pioff: Turns Raspberry Pi off via GPIO switch

Requirements
+ Operatingsystem: archlinux (strict), Kernel >= 4.14 (strict)
+ libpthread and pthread-dev installed
+ Raspberry Pi: additionally libwiringpi and wiringpi dev installed (Raspberry Pi GPIO support)
+ Chipset must be able to run in monitor mode (strict by: ip and iw). Recommended: RALINK chipset (good receiver sensitivity), rt2x00 driver (stable and fast)
+ Raspberry Pi A, B, A+, B+ (Recommended: A+ = very low power consumption or B+), but notebooks and desktops could work, too.
+ GPIO hardware mod recommended

Supported adapters (strict)
+ USB ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
+ USB ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
+ USB ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
+ USB ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
+ USB ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter

hcxdumptool 4.1.5

Warning
You must use hcxdumptool only on networks you have permission to do this, because
– hcxdumptool is able to prevent complete wlan traffic
– hcxdumptool is able to capture handshakes from not connected clients (only one single M2 from the client is required)
– hcxdumptool is are able to capture handshakes from 5GHz clients on 2.4GHz (only one single M2 from the client is required)
– hcxdumptool is able to capture extended EAPOL (RADIUS, GSM-SIM, WPS)
– hcxdumptool is able to capture passwords from the wlan traffic
– hcxdumptool is able to capture plainmasterkeys from the wlan traffic
– hcxdumptool is able to capture usernames and identities from the wlan traffic

Download and Install:

Source: https://github.com/ZerBea